#Printer rip curve software#
#Printer rip curve windows#

After determining the Total Ink Limit using the method described above it is recommended to use this value when generating the patches in the profiling software.

#Printer rip curve software#

IMPORTANT NOTE: Wasatch noticed improved results when the Total Ink Limit was applied within the profiling software rather than within SoftRIP. Enter the percent for Total Ink Limit, click OK to exit the Color Transforms window, click OK to exit the Imaging Configuration window, and save the вЂњunlinearizedвЂќ Imaging Configuration.

#Printer rip curve windows#

Above the Halftone Properties on the right side of the Color Transforms windows is the Ink Limit (Total Percent) control. If setting a Total Ink Limit in Wasatch, return to the Color Transforms window. If there are issues with any of these test patterns, set a Total Ink Limit or return to the Individual Ink Channel Reduction step to apply stronger reductions.

This is an individual preference and is determined by what drying time would be acceptable in a production environment. This file can be edited at any time.Д«e aware of the amount of drying time needed before the patches can be handled in this step because this may indicate that further ink limiting is required. This information will be available to anyone who clicks the Info button later. When done, select Save from the File menu and the info.txt file will be saved within the Imaging Configuration. When Edit Info is clicked, the default text editor will open for entering notes. This is especially helpful if the final Imaging Configuration will be distributed and is a good place to keep track of changes as the Imaging Configuration is built. If these settings are changed, return to the beginning of Step 1 to restart the process.Д«ack on the Imaging Configuration window, click the Edit Info button and create a text file to record the properties selected as part of the configuration. NOTE: It is extremely important that all printer settings, halftone settings, inks, media, print modes, and other factors that affect the print condition be set prior to ink limiting. When the selections are complete, click OK. Determine the intended output configuration and select from features included with the printer. Every printer has a different set of printer properties. This will launch a window that provides additional settings for the printer, such as print modes, resolutions, inksets, etc. On the Imaging Configuration window, click the Properties button.